Seaspy Model ECC-2-MO Monochrome Camera Acetal and Titanium
Manufactured for long term immersion use, this camera has been designed to provide high performance at an economic price by eliminating features that are often not required.
Its small size and rugged design makes the ECC-2-MO ideal for use in many situations where a camera needs to be permanently installed in seawater.
The camera offers very high image resolution and its exceptional low light performance will often provide a good image in ambient light without the need for artificial lighting.
A voltage regulator with reverse polarity protection is provided to allow the camera to operate from supplies ranging from 13 to 30 volts dc.
The MCIL4MP connector on a short cable tail, is moulded directly to the camera end cap for maximum durability and minimum wastage of space.
Most other underwater connectors can be fitted on request or the cable can be moulded directly to the end cap if the ability to disconnect from the cable is not required.
Housing materials have been chosen to eliminate corrosion in marine environments even during long term or permanent immersion.
SEASPY ECC-2-MO SPECIFICATION
|Dimensions||50mm diameter (2.0 in), 123mm long 4.9 in)|
|Weight||450gm (1.0lb) in air 210gm (0.5lb) in water|
|Depth Rating||150 Metres (492 feet)|
|Resolution||570 TV lines|
|Light required||0.0003 Lux minimum light|
|Lens type||4.0mm f1.2 fixed focus. Camera set to Electronic Iris|
|Video options||PAL or NTSC|
|Connector options||Most connectors can be supplied on request|
|Material||Titanium end cap with Acetal body and Peek front ring.|