Seaspy Model B4-LED
The Seaspy Model B4-LED controller provides power and control of an underwater video camera and LED light in a rugged, lightweight and easy to operate package.
Housed in an attractive power coated, extruded Aluminium case with wipe clean membrane front panel, this unit is ideal for use in dive control rooms or mobile units where space is at a premium.
An Camera on / off button on the front panel controls a fixed 18vdc supply which is compatible with most composite output video cameras.
Buttons on the front panel allow the light to be switched on / off and intensity varied from maximum brightness to a low level.
The LED light is powered by a constant current supply, variable at up to 2 Amps for use with the Submertec UVL-3 LED light. This supply can deliver 2 Amps at up to 28v when used with long cables.
A rotary current limit switch on the rear panel allows the LED current to be limited so that it can be used with lights from other manufacturers.
All connections are to the clearly marked rear panel.
Two independent BNC video outputs are provided to allow additional monitors to be connected if required and video level can be adjusted if required.
SEASPY Model B4-LED SPECIFICATION
|Dimensions||233mm wide, 140mm high, 315mm deep (excl handles).|
|Power Source||100 to 240 vac / 50-60Hz / 3 Amp|
|Camera power||Constant current from 28vdc supply|
|Lamp Power||Adjustable up to 30 volts dc with 100 watt lamp|
|Lamp Control||Variable brightness|
|Video input||Composite video (CVBS)|
|Video Output||Adjustable level with 2 independent buffered outputs|
|Umbilical connection||Amphenol 97-3102A-18-12S
(97-3106-18-1P required on cable end)